Tweed Deluxe 5E3 FULL RIG

A full-rig capture of a handwired Tweed Deluxe 5E3 kit build - the classic tweed sound, musical early breakup with a loose, sagging low end. This is the same amp from my original 5E3 DI pack, now captured through its own cab and mic'd for a complete, ready-to-use tone. This amp has been modified with a 3-way negative feedback switch. The combo houses a WGS G12Q 8-ohm 20W speaker, captured with a blended SM57 and Rode NT2. No cab IR needed — these are true full-rig captures straight out of the box. What's included: 2 full-rig calibrated A2 NAM captures from the full pack. No cab IR required. **Edge of Breakup** Bright input 1, Vol 1: 10, Vol 2: 3, Tone: max NFB: Added NFB + No Cathode Bypass Cap Smooth and musical, sitting right on the edge of breakup. Tighter than a stock 5E3 with the added negative feedback. Takes pedals extremely well. The classic "amp on the edge" tube sound. **Rock and Roll** Jumpered channels, Vol 1: 5, Vol 2: 5, Tone: max NFB: Stock 5E3, stock cathode bypass cap Vintage rock and roll saturation — thick, overdriven tube tone with real bite. Cleans up nicely by rolling back the guitar volume, and gets aggressive fast if you dig into the strings. The full pack includes 34 calibrated A2 NAM captures total: 17 amp-only DI captures + 17 matching full-rig versions, so you can use either the raw DI with your own IR or the complete mic'd tone as-is. Settings Excel file included with full details on every capture. Get the full 34-capture pack here: https://shop.madhatteramplab.com/s/tweed-deluxe-5e3-t3k Reamp Chain: Motu M4 > Lehle P-Split III > 5E3 > SM57/NT2 mic blend > Motu M4 Amp specs: Preamp: Sovtek 12AY7, JJ 5751 Power tubes: GrooveTubes 6V6-S Rectifier: NOS Sylvania 5Y3