Speed Shop A12Q - Eminence 1x12 IR

The Speed Shop A12Q is an Alnico speaker made by Weber Speakers and is based on the late ‘50s Jensen P12Q. I loaded this speaker in my Eminence open back 1x12 cabinet. The speaker is most often recommended for use with a Tweed Deluxe. I also found it to pair well with my Supro Black Magick. My starting point is to start 1” (2.54cm) off the center of the cap. The speaker is most balanced to my ears near the cap, while the Jensen P12Q Reissue is most pleasing near the cone. 24Bit 48kHz - 500ms - MPT Format Naming Convention A12Q 1x12 <Mic Model> <Distance from Center> <Distance Off Grill> <Off Axis Angle, if applicable> Mic Models: -013 - Soyuz 013 FET Small Diaphragm Condensor -545 - Shure 545SD -BU87IC - Beesneez BU87I C Large Diaphragm Condensor -CM1 Black - 3U Audio Black CM1 Large Diaphragm Condensor -CM1 - Teal - 3U Audio Teal CM1 SE Large Diaphragm Condensor -E906 - Sennheiser E906 all 3 settings -I5 - Audix I5 -LR100 - Monoprice LR100 Ribbon -M69 - Beyerdynamic M69TG -M88 - Beyerdynamic M88TG -M160 - Beyerdynamic M160 Ribbon -M201 - Beyerdynamic M201TG -MD421 - Sennheiser MD421 II -OM2 - Audix OM2 -OR57 - Shure SM57 w/ Crimson Orange Mod Handle -PR20 - Heil PR20 -SM48 - Shure SM48 -SM57 - Shure SM57 -ST170 - Sterling ST170 Ribbon Equipment Used: -Behringer A800 Power Amp -Chameleon Labs 7603 Microphone Preamp -Steinberg UR824 Audio Interface -Voxengo Deconvolver 10sec sine sweeps were used to excite speaker